Web configuration interface 3.4 – 2N VoiceBlue Next v3.0 User Manual

Page 62

Advertising
background image

Web Configuration Interface

3.4

62

LCR table

The LCR (Least Cost Routing) table helps route calls according to the called
number and depending on the day time and weekday.

Prefix list – select a list of prefixes to be used for the selected LCR row.

Time limitation – set a time limitation for a particular LCR row.

Weekend usage – enable/disable a particular PCR row during weekends.

Maximum call length – set the maximum length (in minutes) for an active
outgoing call to GSM/UMTS.

Groups – set the GSM outgoing groups to be used for the selected LCR row.

Tariffs – select the tariff group (free minute counter) to be used for the
outgoing call. Refer to the GSM outgoing groups for more details.

Ignore tone detection in last group – having detected a user defined tone
(refer to GSM basic settings), the GSM gateway terminates the call and
seeks for another call setup option by default. If this parameter is activated,
the GSM gateway ignores the tone detection results and sets up the call if this
is the last call setup option.

Note

You are recommended to read the Routing Algorithm for Outgoing
Calls
section on p. 41 before setting the LCR table and prefix lists.

Remember to set the tariffs correctly in the GSM outgoing groups
section to make tariff routing work properly.

CLIP routing table + CallBack

The table permanently assigns CLIPs to the extensions to which incoming calls are
to be routed automatically and set the CLIP list for the GMS network for which the
CallBack function is enabled.

GSM number (CLIP) – user identification in a GSM/UMTS network.

AutoDial – enable/disable CLIP routing for the selected CLIP.

Dial to VoIP – enter the VoIP destination number for CLIP routing.

Auto CallBack – enable/disable CallBack for the selected CLIP.

Limit – set the maximum call length (in minutes).

Note

Remember to activate the CallBack mode in the GSM incoming groups
window for a proper CallBack function.

Mobility Extension

The table registers the Mobility Extension users.

Name – enter the user name for calling to VoIP.

User – enter the registration user name for VoIP.

Password – enter the registration user password for VoIP.

Advertising