At interface 4.2 – 2N VoiceBlue Next v3.0 User Manual

Page 71

Advertising
background image

AT Interface

4.2

71

mode – algorithm (0-none, 1-semiduplex, 2-fullduplex)

atms,atfs – transit, receive gain (3=+5dB, 1=+2.5dB, 0=0dB,

2=-2.5dB, 4=-5dB

AT%G02=mode,atms,atfs

Voice processing settings (for TC35 GSM modules only)

mode – algorithm (2-echo canceller)

atms,atfs – transit, receive gain (3=+5dBm, 1=+2.5dB, 0=0dB,

2=-2.5dB, 4=-5dB

AT%G06=mmdd,…mmdd…

List of holiday days (mm-month;dd-day), max length of line is
63 chars!

AT%G07=mmdd,…mmdd

Net list of holiday days

AT%G08=delay,min,max,tout

Parameters of dialling from ISDN to GSM

delay– relax delay between calls

min – minimum length of number dialled from ISDN

max – maximum length of number dialled from ISDN

tout – delay between dialled digits

GSM Settings (X-GSM Group)

AT%G#0=sim

Mode of switching SIM card

sim>

0- OFF – group is turn-off

1-4 – SIM card 1-4

5 – switching by time

6 – switching by random time

AT%G#1=netid,clir,min,sms,

sec,sec2,pseudo

Basic parameters of SIM card in slot 1

netid-network number

clir – 0=default,1=enabled,2=disabled

min – maximum number of minutes called

sms – maximum number of SMS sent

sec – minimum call length (not for cdr info)

sec2 – accuracy of call length measurement (not for cdr info)

pseudo – default = 0

AT%G#2=netid,clir,min,sms,

sec,sec2,pseudo

Basic parameters of SIM card in slot 2

List of Networks

AT%N#0=op/np,…op/np

List of prefixes replaced by new prefixes (#-number of netlist;

op-old prefix;np-new prefix)

AT%N#1=pr/n,…pr/n

List of prefixes dialled into ISDN (to be used for LCR table)

pr=prefix n=length of number (parameter /n is optional)

AT%N#2..7=pr/n,…pr/n

Other 7 lists of prefixes dialled into ISDN

AT%N#9=net,max

Net-network number, max-default length of number dialled from

ISDN

LCR Table

AT&R

Shows LCR table

AT%R##=net,hh:mm/hh:mm/w*,gr Settings of line ## (0..63) of LCR table

net – number of network list (0..8)

hh:mm/hh:mm/w* – line using time limitation
gr – GSM group numbers

Test Calls

AT!SGxx=dial

Initiates testing call from AUX interface (xx is the called

interface):

00..31 GSM module

32- to GSM via GSM module according to call prefix

AT!WGxx

Connects the following call from interface xx to AUX interface

Advertising