AirLive Ether-GSH2416W - Manual (Page 14)

14
2.4.1 Port-based VLAN Configuration
The port-based VLAN divides the ports into different Virtual LAN domain groups. After setting the
port -based VLAN, the different VLAN groups can’t access each other. Like the different real LAN
can’t access each other. Before starting this configuration, it is required to set the VLAN type to
port-based VLAN first. Then click the Configure button after the port-based VLAN type is activated
(shown as figure below).
VLAN initial setting page is shown as below:
You can add, delete, and modify the port-based VLAN for your need. Currently this system supports
up to 32 port-based VLAN groups for manual entry. The next pages will be described in detail how
to configure the port-based VLAN.
NOTE: The default port-based VLAN group (No.1) always exists and can’t be removed. This
group needs to be manually maintained to make this function work properly. Initially, the
default group contains members for all ports. If a new group is created (e.g. port 1, 2, 3 as
members of group No.2) and this group wants to be isolated from the other ports, port 1, 2 and
3 in default group need to be manually set to “Not member” to make port-based VLAN group
No.2 available. Of course, manually set corresponsive port(s) to “Member” in default group as
your need if a group wants to be removed.