2 firmware update via bootp/tftp – AirLive Ether-GSH2416W User Manual
Page 48
Advertising
![background image](/manuals/553882/48/background.png)
48
2.9.1.2
Firmware Update Via BOOTP/TFTP
Before to do the firmware update, it is required to correctly prepare BOOTP/TFTP server and the
firmware file which will be uploaded to the switch by the TFTP server. (Please refer to the vendor’s
instruction guide for setting up the TFTP server you would like to use.
While the BOOTP/TFTP server and the firmware file are ready, click the Apply button to start the
firmware update through the any front port on the switch.
The time for processing the firmware update will approximately take 55 seconds if there is no
communication problem between the switch and the BOOTP/TFTP server and the firmware file can
be located by TFTP server.
Advertising