AirLive Ether-GSH2416W - Manual (Page 32)

32
2.6.1 Get/Refresh the Latest Mirror Settings
Click the Mirror menu on the web page, the latest mirror settings on the switch will be displayed.
This is also the page to configure port mirroring function.
The following parameters are required to be set:
„
Mirroring Options – There are four options for each port:
¾ Disable Mirror – to disable mirror function.
¾ Mirror All Frames – to set the corresponsive port to be a monitored port to investigate
bi-directional traffic.
¾ Mirror Incoming Frames – to set the corresponsive port to be a monitored port to
investigate only ingress (receiving, Rx) traffic.
¾ Mirror Outgoing Frames – to set the corresponsive port to be a monitored port to
investigate only egress (forwarding, Tx) traffic.
„ Monitored Port – The port which is monitored.
„ Capture Port – All traffics mirrored from monitored port are received on capture port.