AirLive Ether-GSH2416W - Manual (Page 59)

59
„ Configuration Restore via TFTP
Press “CR” or “cr” to restore configurations from TFTP server. The TFTP server IP
address and configuration filename need to be assigned properly. IP/Netmask/Gateway is
an option to be restored to the current system or not.
After this process is successfully finished, system will be automatically rebooted to
reactivate the functions for restored configurations.
„ Reboot System
Press “RB” or “rb” to restart this system.
„
Reboot System After Write Default
Press “RD” or “rd” to reset this system to factory settings.
„ Logout
Press “LO” or “lo” to logout system.