AirLive Ether-GSH2416W - Manual (Page 58)

58
„ Upgrade Firmware Via TFTP or BOOTP/TFTP
Press “UF” or “uf” to start firmware upgrade progress via TFTP server.
Choose “1” to update firmware via TFTP. Enter TFTP server IP address and firmware
filename.
Choose “2” to update firmware via BOOTP/TFTP.
After the Ether-2416W web smart switch is starting reboot, the firmware upgrade progress
is finished correctly. Press “IG” or “ig” to check firmware version after login.
„ Configuration Backup via TFTP
Press “CB” or “cb” to backup configurations as a file to TFTP server. The TFTP server IP
address and configuration filename need to be assigned properly.