AirLive Ether-GSH2416W - Manual (Page 25)

25
2.5.1 Trunking Rules
The following rules will limit the configurations for port trunking:
„
The attributes of all trunk member ports in Port Configuration, Mirror, Rate Control, 802.1Q
VLAN and Port-Based VLAN functions must be the same.
„ All trunk member ports can not be a capture port or monitored port in Mirror function.
„ If any fiber port (from Port1 to Port16) and copper port (from Port17 to Port24) want to be
grouped together, the auto negotiation option must be enabled for all member ports. And only
the 1Gbps full duplex link mode is available to setup the trunk.
„ After enabling a trunk group, a new trunk port will be created in the port list. For example,
Port2, Port4, and Port6 belong to Trunk 1. Check the other page (Port Status) with port list,
Trk1 port will be added after all normal ports and the member ports of this trunk group will
disappeared.