AirLive Ether-GSH2416W - Manual (Page 20)

20
2.4.2.1 802.1Q VLAN Port Configuration
This page is to configure Port VID (PVID) for Untag port members and some ingress rules per port
basis to manipulate the packets related to the tag-based VLAN. Click the Port number (e.g. Port10)
to enter the 802.1Q VLAN Port Configuration page (shown as below).
The following figure shows the 802.1Q VLAN Port Configuration page by port. (e.g. Port10)
You can set the individual port for configuring the 802.1Q settings in the following fields:
¾
PVID – enter a valid VLAN ID (1-4094), and PVID must be one of the existing VLAN group
ID. This parameter is useful for Untag port member.
¾ UnTag Frame – Accept or drop incoming frames without VLAN tag.
¾ Tag Frame – Accept or drop incoming frames with VLAN tag.
Finally, there are 2 buttons to select:
Apply: To submit the port configuration settings to the switch.
Back: To back to the 802.1q main setting page.