AirLive Ether-GSH2416W - Manual (Page 57)

57
„ VLAN Type
Press “VT” or “vt” to get current VLAN type or set to different type.
If selected VLAN type is successfully changed from one to the other, the message “VLAN
type is updated!” will be shown up. If selected VLAN type is the same as before or entry is
invalid, this action won’t be executed.
„ Set PVID
Press “VV” or “vv” to set per-port PVID in 802.1Q VLAN function. The PVID of admin
port (port 25) in 802.1Q VLAN function also can be modified. The PVID which user
wants to set must be one of the existing VLAN group ID.
Admin port is the port you can manage the switch function. The Default Admin PVID is 1.
„ Get PVID
Press “VP” or “vp” to show per-port PVID in 802.1Q VLAN function. The PVID of admin
port (port 25) in 802.1Q VLAN function also can be showed.