AirLive RS-3000 - Manual (Page 138)

STEP 3 ﹒Enter the following setting in Outgoing Policy:
 Click New Entry
 Destination Address: Select WAN_Group that set by STEP 2. (Blocking by IP)
 Action, WAN Port: Select Deny
 Select to enable Content Blocking
 Select to enable IM/P2P Blocking
 Click OK (Figure15-11)
Figure15-11 Setting Blocking Policy
STEP 4 ﹒Complete the setting of forbidding the users to access to specific network. (Figure15-12)
Figure15-12 Complete Policy Setting
Deny in Policy can block the packets that correspond to the policy rule. The System Administrator
can put the policy rule in the front to prevent the user connecting with specific IP.
136