AirLive RS-3000 - Manual (Page 9)

2.2 Example for configure RS-3000 Web UI
STEP 1:
1. Connect the Admin’s PC and the LAN port of the Security Gateway.
2. Open an Internet web browser and type the default IP address of the Security Gateway as
192.168.1.1 in the address bar.
3. A pop-up screen will appear and prompt for a username and password. Enter the default login
username (admin) and password (airlive) of Administrator.
Figure 2-1 Login page
STEP 2:
After entering the username and password, the Security Gateway WEB UI screen will display. Select
the Interface tab on the left menu and a sub-function list will be displayed.
 Click on WAN from the sub-function list, enter proper the network setup information
 Click Modify to modify WAN1/2 settings (i.e. WAN1 Interface)
WAN1 interface IP Address 60.250.158.66
NetMask 255.255.255.0
Default Gateway 60.250.158.254
DNS Server1 168.95.1.1
7