3 dmz – AirLive RS-3000 User Manual
Page 46
Advertising
5.3 DMZ
Setting DMZ Interface Address (NAT Mode)
STEP 1
﹒Click DMZ Interface
STEP 2
﹒Select NAT Mode in DMZ Interface
Select
NAT in DMZ Interface
Enter
IP Address and Netmask
STEP 3
﹒Select Ping and HTTP
STEP 4
﹒Click OK (Figure 5-13)
Figure 5-13 Setting DMZ Interface Address (NAT Mode) WebUI
Setting DMZ Interface Address (Transparent Mode)
STEP 1
﹒Select DMZ Interface
STEP 2
﹒Select Transparent Mode in DMZ Interface
Select
DMZ_Transparent in DMZ Interface
STEP 3
﹒Select Ping and HTTP
STEP 4
﹒Click OK (Figure 5-14)
Figure 5-14 Setting DMZ Interface Address (Transparent Mode) WebUI
In WAN, the connecting way must be Static IP Address and can choose Transparent Mode in
DMZ.
44
Advertising