8 snmp – AirLive RS-3000 User Manual
Page 34
Advertising
4.8 SNMP
STEP 1
﹒ Select SNMP in Settings function, click Enable SNMP Agent and type in the following
information:
Device Name: The default setting is “Office UTM Gateway”, and user can change it.
Device Location: The default setting is “Taipei, Taiwan”, and user can change it.
Community: The default setting is “public”, and user can change it.
Contact Person: The default setting is “root@public”, and user can change it.
Description: The default setting is “Office UTM gateway Appliance”, and user can
change it.
Click
OK.
The SNMP Agent setting is done. So administrator can install SNMP management
software on PC and monitor RS-3000 via SNMP Agent. (Figure 4-16)
Figure 4-16 SNMP Agent setting
32
Advertising