AirLive RS-3000 - Manual (Page 14)

3.2 Permitted IP
Add Permitted IPs
STEP 1 ﹒Add the following setting in Permitted IPs of Administration: (Figure 3-3)
 Name: Enter master
 IP Address: Enter 163.173.56.11
 Netmask: Enter 255.255.255.255
 Service: Select Ping and HTTP
 Click OK
 Complete add new permitted IPs (Figure 3-4)
Figure 3-3 Setting Permitted IPs WebUI
Figure 3-4 Complete Add New Permitted Ips
To make Permitted IPs be effective, it must cancel the Ping and WebUI selection in the WebUI of
RS-3000 that Administrator enter. (LAN, WAN, or DMZ Interface)
Before canceling the WebUI selection of Interface, must set up the Permitted IPs first, otherwise, it
would cause the situation of cannot enter WebUI by appointed Interface.
12