AirLive RS-3000 - Manual (Page 37)

Connect Mode:
 Display the current connection mode:
 PPPoE (ADSL user)
 Dynamic IP Address (Cable Modem User)
 Static IP Address
 PPTP (European User Only)
Saturated Connections:
 Set the number for saturation whenever session numbers reach it, the RS-3000 switches to the
next agent on the list.
Priority:
 Set priority of WAN for Internet Access.
Connection Test:
 The function works to identify WAN port’s connection status. The testing ways are as following:
 ICMP：User can define the IP address and RS-3000 will ping the address to verify WAN
port’s connection status.
 DNS：Another way to verify the connection status by checking the DNS server and Domain
Name configured by user.
Upstream/Downstream Bandwidth:
 The System Administrator can set up the correct Bandwidth of WAN network Interface here.
Auto Disconnect:
 The PPPoE connection will automatically disconnect after a length of idle time (no activities). Enter
“0” means the PPPoE connection will not disconnect at all.
DMZ:
 The Administrator uses the DMZ Interface to set up the DMZ network.
 The DMZ includes:
 NAT Mode：In this mode, the DMZ is an independent virtual subnet. This virtual subnet can
be set by the Administrator but cannot be the same as LAN Interface.
 Transparent Mode: In this mode, the DMZ and WAN Interface are in the same subnet.
35