AirLive RS-3000 - Manual (Page 141)

The external user controls the internal PC through remote control software (Take
pcAnywhere for example)
STEP 1 ﹒Set up a Internal PC controlled by external user, and Internal PC’s IP Address is 192.168.1.2
STEP 2 ﹒Enter the following setting in Virtual Server1 of Virtual Server function: (Figure15-17)
Figure15-17 Setting Virtual Server
STEP 3 ﹒Enter the following in Incoming Policy:
 Click New Entry
 Destination Address: Select Virtual Server1 (61.11.11.12)
 Service: Select PC-Anywhere (5631-5632)
 Click OK (Figure15-18)
Figure15-18 Setting the External User Control the Internal PC Policy
STEP 4 ﹒Complete the policy for the external user to control the internal PC through remote control
software. (Figure15-19)
139