AirLive RS-3000 - Manual (Page 18)

SIP protocol pass-through:
 Select to enable the function of RS-3000 of passing SIP protocol. It is also possible that the SIP
protocol can pass through RS-3000 without enabling this function depends on the SIP device’s
type you have.
Administration Packet Logging:
 After enable this function; the RS-3000 will record packet which source IP or destination address
is RS-3000. And record in Traffic Log for System Manager to inquire about.
System Reboot:
 Once this function is enabled, the Office UTM Gateway will be rebooted.
16