AirLive RS-3000 - Manual (Page 35)

STEP 2
﹒ Select SNMP in Settings function, click Enable SNMP Trap Alert Notification and type in
the following information:
 SNMP Trap Receiver Address: Input SNMP Trap Receiver site of IP address
 SNMP Trap Port: Input the port number.
 Click OK.

SNMP Trap setting is done. So administrator can receive alert message from PC
installed with SNMP management software, via RS-3000 SNMP Trap function.
(System will transfer the alert messages to specific IP address, when RS-3000 is
attacked by hacker, or connect/disconnect status of line. (Figure 4-17)
Figure 4-17 SNMP Trap setting
4.9 Language
Select the Language version (English Version/ Traditional Chinese Version or Simplified Chinese
Version) and click OK. (Figure 4-18)
Figure 4-18 Language Setting WebUI
33