AirLive RS-3000 - Manual (Page 255)

Interface
STEP 1 ﹒Enter Interface in Status function; it will list the setting for each Interface: (Figure 26-1)
 Forwarding Mode: The connection mode of the Interface
 WAN Connection: To display the connection status of WAN
 Max. Downstream / Upstream Kbps: To display the Maximum
Downstream/Upstream Bandwidth of that WAN (set from Interface)
 Downstream Alloca.: The distribution percentage of Downstream according to WAN
traffic
 Upstream Alloca.: The distribution percentage of Upstream according to WAN traffic
 PPPoE Con. Time: The last time of the RS-3000 to be enabled
 MAC Address: The MAC Address of the Interface
 IP Address/ Netmask: The IP Address and its Netmask of the Interface
 Default Gateway: To display the Gateway of WAN
 DNS1/2: The DNS1/2 Server Address provided by ISP
 Rx/Tx Pkts, Error Pkts: To display the received/sending packets and error packets of
the Interface
 Ping, HTTP: To display whether the users can Ping to the RS-3000 from the Interface
or not; or enter its WebUI
Figure 26-1 Interface Status
253