2 date/time – AirLive RS-3000 User Manual
Page 24
4.2 Date/Time
Synchronize system clock:
Synchronizing the RS-3000 with the System Clock. The administrator can configure the
RS-3000’s date and time by either syncing to an Internet Network Time Server (NTP) or by
syncing to your computer’s clock.
STEP 1
﹒Select Enable synchronize with an Internet time Server (Figure 4-7)
STEP 2
﹒Click the down arrow to select the offset time from GMT.
STEP 3
﹒If necessary, select Enable daylight saving time setting
STEP 4
﹒Enter the Server IP / Name with which you want to synchronize.
STEP 5
﹒Set the interval time to synchronize with outside servers.
Figure 4-7 System Time Setting
Click on the Sync button and then the RS-3000’s date and time will be synchronized to the
Administrator’s PC
The value of Set Offset From GMT and Server IP / Name can be looking for from Assist.
22