AirLive RS-3000 - Manual (Page 40)

STEP 2 ﹒Setting the Connection Service (ICMP or DNS way)：
 ICMP：Enter an Alive Indicator Site IP (can select from Assist) (Figure 5-3)
 DNS：Enter two different DNS Server IP Address and Domain Name (can select from
Assist) (Figure 5-4)
 Setting time of seconds between sending alive packet.
Figure 5-3 ICMP Connection
Figure 5-4 DNS Service
Connection test is used for RS-3000 to detect if the WAN can connect or not. So the Alive
Indicator Site IP, DNS Server IP Address, or Domain Name must be able to use permanently. Or it
will cause judgmental mistakes of the device.
38