Atop Technology AW5500C User manual - Manual (Page 100)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
95
7.3 LED Indicators
Table 7.8
Name Color Status Description
Regular AP
Mode
Green
On
The Access Point (AP) function is enabled and has more
than one wireless client connected.
Blinking
The AP function is enabled and does not have any wireless
client connected.
Off The Access Point (AP) function is disabled.
WDS Bridge
Mode
Yellow
On
The WDS Bridge function is enabled and the WDS is
connected successfully.
Blinking
The WDS Bridge function is enabled and the WDS is not
connected successfully.
Off The WDS Bridge function is disabled.
AP Client Mode Red
On
The AP Client function is enabled and connected to the
remote AP successfully
Blinking
The AP Client function is enabled but not connected to the
remote AP
Off The AP Client function is disabled.
P2P
Orange
On Device’s WPS mode is enabled in AP mode.
Blinking WPS is connecting at Soft AP mode
Off
WPS connection failed.
Green
On
Device’s WPS P2P mode is enabled in AP client mode.
Blinking WPS is connecting at client mode
Off
WPS connection failed.
Locate Green
Blinking The AP is being located
Off The AP is not being located
LAN Orange
Blinking Data is transmitting on Ethernet
On Ethernet is connected on 100Mbps