Atop Technology AW5500C User manual User Manual
Page 26
Advertising
Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
21
use in order to associate with this AP. Each AP (AP1, AP2, and AP3) can have their own
SSID for better wireless network management. You can use the
“Scan network”
function to learn about the different SSIDs
and channel numbers in the device’s
surroundings, please be patient as this process might take as long as 10 seconds as
shown below. Once it has finished scanning, names and basic properties of neighboring
networks will be shown as in
Figure 4.4. When no neighbors have been found the answer
is as follows Figure 4.5. Keep in mind that the SSID should be unique unless wireless
roaming is required.
Figure 4.3
Advertising