Atop Technology AW5500C User manual - Manual (Page 47)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
42
Gratuitous ARP enables to periodically send out an ARP response automatically to announce
that AW5500C is in the network. The frequency in minutes could be set in the nearby box.
4.6 SNMP Settings
The SNMP is used by network management software to monitor devices in a network to
retrieve network status information and to configure network parameters. The SNMP Settings
shows the configuration of this device so it can be viewed or edited by third-party SNMP
software as shown below, Figure 4.21.
Figure 4.21