Atop Technology AW5500C User manual - Manual (Page 61)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
56
4.11.2 Date/Time Settings
Date and time can be set manually, or using Network Time Protocol (NTP) to automatically
synchronizes with a Time Server. For auto-synching check the box below NTP Server
Settings “Obtain date/time automatically” proceeding then to fill the IP address or host
name for it if a hostname is entered, the DNS server must be configured properly; a Time Zone
can be selected as well, Figure 4.33.
Figure 4.33