Atop Technology AW5500C User manual - Manual (Page 86)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
81
6.5 P2P Button (External Physical WPS button)
AW5500C has an external physical WPS button – P2P Button, which can build the connection
directly between two AW550C. S o that user’s manual setting steps can be decreased.
1. You have to tick this option to enable P2P button working. This option can be found in
webpage, under Wireless, Advanced Settings label. The default setting is enabled.
Figure 6.5
2. To establish connection succeeds, all device IP address and subnet mask setting should
be correct. Users can use serial manager to setup.