Atop Technology AW5500C User manual - Manual (Page 62)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
57
4.11.3 Alert Event
There are five events that will trigger the alarm; these alerts are useful for security control or
security monitoring, Figure 4.34
 Cold Start, when there is a power interruption.
 Warm Start, when the device resets.
 Authentication Failure, when an incorrect username or password is entered.
 IP Address Changed, when the device’s IP is changed.
 Password Changed, when the administrator password is changed.
Any of the five events would trigger an alert. When enabled, an email alert would be sent to the
designated address in the E-Mail Settings. A Trap alert would be sent to the designated Trap
server in the SNMP Settings.
See “Email Settings” section , to specify the email addresses to which the alert message is
sent. See “SNMP Settings” section to specify a SNMP trap server.
Figure 4.34