Atop Technology AW5500C User manual - Manual (Page 18)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
13
3.5 Factory Default Settings
Upon arrival, the device will be set as Regular AP, the rest of the settings are as follow:
Table 3.2
Mode Regular AP WDS Bridge AP Client
Wireless
Basic Settings
AP Enabled AP1
N.A.
SSID AW5500C
SSID Broadcast Enabled
Wireless Mode 802.11b/g/n
Channel 1 (Automatic Channel Selection enabled)
Bandwidth Auto 20/40 MHz
Security Settings
Security Mode Disabled N.A. N.A.
WPS Settings
WPS
Disabled N.A. WPS BUTTON
PIN Number
Advanced Settings
Regulatory Domain US (United States)
Tx Power 100%
Short GI Enabled
WMM Enabled
WPA Group Rekey Interval 600
STP Disabled
Forward Delay 4 Seconds
Fast Handoff Disabled N.A.
Wireless Isolation Disabled N.A.
20/40 MHz Coexistence Enabled N.A. N.A
P2P Button Enabled
Scheduler Settings
Number 1 N.A N.A