Atop Technology AW5500C User manual - Manual (Page 64)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
59
4.11.5 Backup & Restore Configuration
Once all the configurations are set and the device is working properly, you may want to back
up your configuration. Backup can be used when the new firmware is uploaded and it is reset
to a factory default settings, it is done to prevent accidental loading of incompatible old settings.
The backup file could also be used to efficiently deploy multiple AW5500Cs of similar settings
by uploading the settings to the devices.
To backup your configuration, click “Backup”, and a pop-up dialog is prompted for saving the
backup file on your computer. It is important NOT to modify the saved configuration file
by any editor. Any modification to the file may corrupt the file, and it may not be used
for restore. Please contact our authorized distributors for more information on this subject.
To restore the configuration backup, click “Browse” to locate the backup file, and then click
“Upload” to upload the configuration backup file to the device. Once, the backup file is
successfully uploaded; the device will restart, the time needed for this process may vary on the
equipment used, Figure 4.36.
Figure 4.36