Atop Technology AW5500C User manual - Manual (Page 8)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
3
European Community, Switzerland, Norway, Iceland, and Liechtenstein
Model: AW5500C
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
This equipment is in compliance with the essential requirements and other relevant provisions
of 1999/5/EC.
The following standards were applied:
EMC EN 301.489-1 v1.4.1; EN 301.489-17 v1.2.1
Health & Safety EN60950-1: 2001; EN 50385: 2002
Radio EN 300 328 v 1.7.1; EN 301.893 v 1.5.1
The conformity assessment procedure referred to in Article 10.4 and Annex III of Directive
1999/5/EC has been followed.
This device also conforms to the EMC requirements of the Medical Devices Directive
93/42/EEC.
Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may
be restricted to certain frequencies and/or may require a license for operation. For more details,
contact Atop Technical Support.
European Union
This system has been evaluated for RF exposure for humans in reference to the ICNIRP
(International Commission on Non-Ionizing Radiation Protection) limits. The evaluation was
based on the EN 50385 Product Standard to Demonstrate Compliance of Radio Base stations
and Fixed Terminals for Wireless Telecommunications Systems with basic restrictions or
reference levels related to Human Exposure to Radio Frequency Electromagnetic Fields from
300 MHz to 40 GHz. The minimum separation distance from the antenna to a general
bystander is 20 cm (7.9 inches).
UL Notice for Power supplier
The AW5500C series products are intended to be supplied by a Listed Power Unit marked with
a “LPS” (Limited Power Source), or “Class 2” and output rate of 9~48 VDC, 1.0 A minimum, or
use the recommended power supply listed in “Optional Accessories”.