Atop Technology AW5500C User manual - Manual (Page 53)

Atop Industrial Wireless Access Point
AW5500C
User Manual V. 1.0
48
4.9.1 Wired MAC Filtering
When connected to the LAN/Ethernet interface, filtering can be done using this option. The
setting is simple, intuitive and straight-forward; just choose whether to Allow or Deny packets
and proceed to fill in the blanks with the corresponding MAC addresses. Up to 64 different
MAC addresses can be set for allowing as well as for denying packets, Figure 4.25; as a
default, Wired MAC Filtering is disabled. For changes to take effect, press Apply, for saving
those changes just press Save Settings.
Figure 4.25