Atop Technology SE5001A User manual - Manual (Page 19)

User Manual Version 1.0
SE5001A Serial Device Server
17
3.2.2. Networking
Select “2” from “Input choice and enter (0~4):” to enter Networking page as following (Figure 3.4):
Figure 3.4 Network settings
Change network settings of the device including IP address, subnet mask, gateway IP address and SNMP
information on this page. Please note that any changes made on
this page won’t take effect until the device is
restarted.
Note: Press “ESC” key to return to the previous menu.