Configure se5001a as udp – Atop Technology SE5001A User manual User Manual
Page 23
Advertising
![background image](/manuals/554960/23/background.png)
User Manual Version 1.0
SE5001A Serial Device Server
21
3.2.7. Configure SE5001A as UDP
UDP is a connectionless protocol. It is faster than TCP, but does not guarantee packet delivery to the remote
host. Figure 3.9 shows how to setup UDP.
Figure 3.9 Link Mode: UDP Client Setup
Type 3
in the “Input choice(1~5) and enter:“
Input SE5001A
’s local listening port in the “Please input local port:”
Input remote device
’s IP in the “Please input Destination IP:”
Input remote device’s listening port in the “Please input Destination port:”
Advertising