Change the password, Com1 setup – Atop Technology SE5001A User manual User Manual
Page 20
Advertising
User Manual Version 1.0
SE5001A Serial Device Server
18
3.2.3. Change the Password
1.
Select “3” from “Input choice and enter (0~4):” the following screen appears. (Figure 3.5)
Figure 3.5 Change the Password
3.2.4. COM1 Setup
Select “4” from “Input choice and enter (0~4):” the following screen appears (Figure 3.6):
Figure 3.6 Com1 setup
This page includes the option to configure different COM1 parameters, including link mode, serial port settings,
serial buffer, packet delimiter, and advanced control commands.
Advertising