Atop Technology SE5001A User manual - Manual (Page 43)

User Manual Version 1.0
SE5001A Serial Device Server
41
3.3.15. TCP Server Application: Enable Reverse Telnet
Reverse Telnet application is useful if a telnet program is used to connect to SE5001A and the serial interface of the
SE5001A is connected to a Terminal Server. Telnet programs in Windows / Linux usually require special
handshaking to get the outputs and formatting show properly. SE5001A will interact with those special commands
(CR/LF commands) if Reverse Telnet is enabled.
Figure 3.30 TCP Server with Reverse Telnet Enabled
 Follow section 3.2.5 to configure SE5001A in TCP Server mode properly.
 Check Enable Pair Connection to enabled Pair Connection application in SE5001A.

Scroll to the bottom of the page and click on “Save Configuration” button to save the changes.