Atop Technology SE5001A User manual - Manual (Page 30)

User Manual Version 1.0
SE5001A Serial Device Server
28
It is also possible to modify various settings through the web server interface. To do so, please follow the steps
below.
3.3.1. Log in to the System
1. After opening the web browser, ex. Microsoft IE, Firefox or any other web browser, enter the IP address of
SE5001A in the URL bar. Example: http://10.0.50.100
2. The following authentication screen should appear. Enter the user name and password then click on “OK
/ Log in ”. The default user name is admin and password is Null (Leave it blank).
Figure 3.17 Login Security Check
3. The following overview page should show (Figure 3.18). Click on the links on the left to go to different
configuration pages, which are “Networking”, “Security”, and “COM”.
Figure 3.18 Overview