Atop Technology SE5001A User manual User Manual
Page 53
User Manual Version 1.0
SE5001A Serial Device Server
51
available in limited serial device servers), it is necessary to enable Use Credentials From
and select Use Credentials Below from the list (Figure 4.8). Enter the Username and
Password of the serial device server in the respective fields.
iv.
Figure 4.8 Virtual COM with Credentials
v.
Enable Restore Failed Connections to force Virtual COM to automatically restore failed
connections with the serial device server in the case of unstable network connections.
vi.
To test the Virtual COM connection, click the Configuration Wizard button and then click Start
button in the pop up window (Figure 4.9). If the test passes, all checks should be in green. To
apply the changes in the Configuration Wizard window to the Control Panel, click on Use
Settings. Click on Copy to copy the results to the system clipboard.
vii.
To transfer the settings between Virtual COM ports, click on the Copy Settings To button.