Atop Technology SE5001A User manual User Manual
Page 35
Advertising
User Manual Version 1.0
SE5001A Serial Device Server
33
Scroll to the bottom of the page and c
lick on “Save Configuration” button to save the changes.
Go to the Application Configuration section starting from
to apply Virtual COM, Pair Connection, or
Reverse Telnet application if applicable. Otherwise go to the COM Configuration (section
) for serial
settings directly.
Figure 3.23 TCP Server Setup
Note:
LINK1 is associated with COM1; LINK2 is associated with COM2, and so on.
Advertising