Software setup – Atop Technology SE5404D User manual User Manual
Page 16
User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 15 -
3.
Software Setup
SE5404D Serial Device Server is shipped with default settings shown in the following table:
Property
Default Value
LAN1
IP Address
10.0.50.100
Gateway
10.0.0.254
Subnet
Mask
255.255.0.0
LAN2
IP Address
192.168.1.1
Gateway
192.168.1.254
Subnet
Mask
255.255.255.0
User Name
admin
Password
null (leave it blank)
COM (1/2/3/4)
9600,None, 8, 1, No Flow Control, Serial packet delimiter enabled
COM (1/2/3/4)Link Mode Type: TCP Server, Listen port 4660, Filter=0.0.0.0, Virtual COM disabled
SysName of SNMP
name
SysLocation of SNMP
location
SysContact of SNMP
contact