Elnet, Onfiguration, 2 telnet configuration – Atop Technology SE5404D User manual User Manual
Page 18
Advertising
User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 17 -
Figure 3.3 Serial Manager Utility Auto IP
3.2 Telnet Configuration
One may also use Telnet utility to change configuration settings.
Open MS-DOS command prompt window or other telnet tools
Enter the
“Telnet IP_address” (For example, Telnet 10.0.50.100). The system will prompts for a user and
password, the default User is “admin” and password is Null (Leave it blank).
Figure 3.4 System Login by Telnet
Then the following main menu shall appear.
Advertising