Atop Technology SE5404D User manual - Manual (Page 90)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 89 -
Configure by Telnet
Most device supports Telnet login, it will provide additional device-specific parameters that Serial Manager
does not supply. Users can carry out any parameter setting directly through the submenu option
“Config by
Browser ”, and a Web browser is shown in the figure below.
Option
In this dialogue, you can
1. Set the Serial Manager ’s scan interval
2. If device tip option is turned on, Serial Manager will show additional information when your mouse cursor
stays on the device.
3. You can select which Network Interface Card that Serial Manager uses. If this option is set to DEFAULT,
SerialManger will uses the default NIC that the operating system assigns.