Atop Technology SE5404D User manual - Manual (Page 58)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 57 -
4.1.4 Installation
Make sure you have turned off all anti-virus software before beginning the installation. Run the Virtual COM setup
file included in the CD to install Virtual COM driver for your operating system.
In the end of the installation, please select one or two COM ports to become the Virtual COM ports.
4.1.5 Uninstalling
1. From Windows Start menu select Setting, Control Panel, Add/Remove Programs.
2. Select Serial IP in the list of installed software .
3. Click the Add/Remove button to remove the program, or From Windows Start menu select Programs,
Serial IP for ATOP, Uninstall Serial IP to remove the program.
4.2 Virtual COM communication
4.2.1 Enable Virtual COM on SE5404D
From web browser access to SE5404D by typing its IP address,
 click on “COM1” link to access COM1 page,
 on the top half of the page click on “TCP Server”
 CVirtual COM to Enable COM driversenable Virtual COM by putting a check in front of the “Enable” button,
then t
 Enter in the local port number in the “Local Port” field as indicated in the following figure: (ref Figure 4.2)
Figure 4.2 Enable Virtual Com Or you can