Atop Technology SE5404D User manual - Manual (Page 21)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 20 -
Operation: Main[2]Networking[2]LAN 2 Settings
Enter “LAN 2 settings”, and there is all information at this section about IP address, gateway, subnet mask
and IP mode (static/DHCP) of LAN 2.
Figure 3.9 LAN 2 Settings by Telnet
3.2.4 DNS Settings
Operation: Main[2]Networking[3]DNS Settings
Serial Server is able to configure the DNS1 or DNS2 Server IP Address manually. Alternatively, you can set the
Serial Server to receive DNS server IP address from DHCP server automatically by enabling the DHCP of “LAN 1
Settings
”.
Figure 3.10 DNS Settings by Telnet