Atop Technology SE5404D User manual - Manual (Page 35)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 34 -
Figure 3.24 LAN 1 Setting by Web page
3.3.5 LAN 2 Settings
Click on the “Network” link and the following screen shall appear. Fill in LAN 2 IP information on LAN 2 settings
fields. Alternatively, one may activate DHCP client function by checking on “Obtain an IP automatically” field to
obtain IP address, gateway and subnet mask from DHCP server automatically.
Figure 3.25 LAN 2 Setting by Web page
3.3.6 DNS Settings
Click on the “Network” link and the following screen shall appear. Fill in DNS information. Alternatively, you can set
the Serial Server to receive DNS server IP address from DHCP server automatically by enabling t he DHCP of “LAN
1 Settings ”.