Atop Technology SE5404D User manual - Manual (Page 77)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 76 -
restarting. It takes around 30 seconds to complete the programming process. If an error occurs during the
programming process, SE5404D will clear the corresponding memory and the system remains the same before the
process.
B.3 Error Messages
Firmware upgrade may not be successful if errors occur during the process.
Error Cause Message Comments
Illegal Hex file format
Hex File Text Error
Hex File Check-Sum Error
Hex File Format Error
Hex File End of Record Error
SE5404D handshaking problem
SE5404D ACK Start Address Error
SE5404D ACK Length Error
SE5404D Response Command Error
Configuration file
Remote IP not found
Open configuration file failure