Atop Technology SE5404D User manual - Manual (Page 50)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 49 -
Syslog Server IP: Please specify the remote Syslog Serve IP.
Syslog Server Service Port: Please specify the remote Syslog Serve Port.
3.5.3 System Log
Operation: SystemSystem Log
Figure 3.41 COM Log Setting WebUI
3.5.4 COM Log
Operation: SystemCOM Log
Figure 3.42 COM Log Setting WebUI
You can select which COM to be displayed. The first three logs were set to log data length and the last two logs
were set to log data content. COM logs can be retrieved from the device via FTP. FTP login is the same as the
WebUI. They are located in /var/log/logcomxx (xx is the port number).
3.5.5 Time Settings
Operation: SystemTime
One may configure “NTP Server” to obtain Network time automatically or Set it manually by fill in “Set Date and
Time manually ” field. You can enable and specify the Daylight Saving Time if you are located in a DST region. All
the settings on the page require a restart.