Onfiguration, Ogin to, Ystem – Atop Technology SE5404D User manual User Manual
Page 31: Eneral, Nformation, 3 web configuration
User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 30 -
3.3 Web Configuration
1. Make sure your PC is located on the same network sub-net as SE5404D
2. Open a web browser, then Enter in the IP address of SE5404D to be configured. Default user name is
admin and default password is null (leave it blank).
3. SE5404D
’s network, link mode and COM ports settings can be configured in different web pages.
4.
Click “Save Configuration” to save settings.
5.
Click ”Restart” button in “System” link to make the change effective if necessary.
It is also possible to modify various settings through the web server interface. To do so, please follow the steps
below.
3.3.1 Login to System
While on the web browser, ex. Microsoft IE, Firefox or any other web browser, enter the IP address of Serial Server
on the URL bar. Exampl
The following authentication screen shall appear. Enter the user name and password
then click on “OK”. The
default user name is admin and password is Null (Leave it blank).
Figure 3.19 Authorization Request for System Security
3.3.2 General Information
This system overview window gives the general information on Device and Network information (See Fig 3.20)