Atop Technology SE5404D User manual - Manual (Page 22)

User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 21 -
3.2.5 SNMP Settings
Operation: Main[2]Networking[4]SNMP Settings
Serial Server allows the user to Enable or Disable the SNMP function by choose the “[4] SNMP: Disable” and
select “Enable” to enable the SNMP operation. The changes will effective immediately.
Serial Server supports basic SNMP function about system MIB (Management Information Base). It is able to
definite the SNMP Trap server, Read/Write Community, SysName (System Name), SysLocation (System Location)
and SysContact (System Contact) via Telnet console.
Figure 3.11 SNMP Settings by Telnet
3.2.6 COM Port Configuration
SE5404D series allow one to configure the parameters of COM port including COM working mode, port parameters,
enabling or disabling serial buffer’s data and packet delimiter setting.
Figure 3.12 Select COM Port from Serial Settings by Telnet