Atop Technology SE5404D User manual User Manual
Page 86
User manual Version 1.3
4-Port DIN-Rail Serial Device Server SE5404D
Copyright © 2011 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 85 -
The user can also select several devices at once, and carry out the configuration for them at the same time
by selecting
“Apply for all selected devices with the same model”
Note: COM tabs: Generated automatically according to the COM port number of the device. If a device has
4 COM ports, there will be, for example, 4 tabs, COM1, COM2, COM3, and COM4.
Link mode: this is to set up a TCP or UDP connection between the Serial port and the other network devices.
Each COM port corresponds to a link mode, TCP or UDP, which is used to transfer data. The user can set
each link mode and the working parameters according to requirements.